Dr Martens Kestrel S3 Boot

Colour: GAUCHO
Material: VOLCANO
Product Code: 15184201



Fully waterproof Rigger boot with added benefit of a Smartmask® PU cushioned footbed. Additional toe protection, anti-static construction and a steel puncture resistant midsole make this a full S3 specification product delivering the ultimate in comfort and safety.

  • Steel Toe
  • Puncture Resistant Midsole
  • Anti-static
  • Waterproof
  • Heat Resistant Outsole
  • Slip Resistant
  • STANDARD: EN ISO 20345:2011 S3 SRA WR HRO

Safety Features:


Anti Static
Discharges static buildup through the shoe to the floor and therefore reduces accumulation of excessive static buildup. Anti Static electrical resistance between 0.1 and 1000m.

Heat Resistant
Outsole offers heat resistance up to 300 degrees C (or 572 degrees F) for 60 seconds.

Puncture Resistant Sole
Protects against the threat of underfoot hazards with puncture resistant midsole plate. Penetration forces > 1100N.

Safety Toe cap
Toe Cap offers protection from a minimum 200j impact and 15kn compression force.

Slip Resistant
Reduces the risk of slips and falls on hazardous surfaces.

Utlizes a fully waterproof membrane bootie construction for full waterproofing.
S3 Spec

Industrial Oiled Corrected Full Grain Water Resistant Leather 
Fully Padded Ankle for additional protection and comfort Safety Toe Cap which conforms to and exceeds European Standard

HBR® Waterproof membrane with foam backed mesh lining

Removable Anti-static Smartmask® PU-cushioned Footbed with Agion® treatment

Nitrile Rubber Outsole cemented to Cushioned Polyurethane Midsole with a Steel Puncture Resistant Midsole. Heat Resistant to 300°C




The sole is cemented to the upper.


An oiled and snuffed full-grain water-resistant leather.

UK Customers

Free Delivery on orders over £50
(No deliveries are made on Saturday and Sunday)

Free and Easy Returns at collect+ stores or the Post Office

EU Customers

Click here for delivery and returns information

Care Instructions

[Valcano] = Clean Away dirt using a damp cloth, allow to dry apply a clear wax based shoe polish to restore shine as desired. In the event of heavy scuffing or loss of colour then clean as before but add a matching coloured wax based shoe polish and buff up the leather with brush and cloth as required.